Flow Sensors

Current locationHome > Solutions > Flow Sensors

solutions

流量传感器

Flow Sensors

A flow sensor is a device used in measuring flow volume of liquids or gases and then convert the acquired raw signal into readable information. Misensor provides our clients with various specified flow switches and sensors to meet their needs.

A flow switch can be installed in the channel to monitor flow volume of liquids, air or other gaseous media through a system. In the cases when the flow volume exceeds or drops below the pre-set point, a series of actions will be triggered, such as activating an alarm. Then the corresponding instructions will be given by the system to adjust the required behavior and avoid the accidents like burning.

A flow sensor is placed in the water system, aiming to monitor, report and control the flow volume of liquids in the real time. The paddles or magnetic patches in the sensors can be rotated by whatever substance is flowing by, and the pulse signals are sent from Hall element to the controller which can finally display the flow volume. The mentioned flow sensors are applied in different fields, including coffee machine, water fountain, heater, bottled beverage production line, remote irrigation system and so on.

INDUSTRY APPLICATION

IndustrialApplications

Industrial

Consumer

Agriculture

In the field of engineering machinery, our sensors are ideal for different scenarios in managing cooling oil level and temperature in generators, monitoring and controlling positions of elevator, security equipment and production line etc. Suitable solutions of the torque and pressure sensors can be also presented. For off-road equipment, diverse solutions of liquid level, position and temperature management can be found in our company as well. Our reliable thermal management system and safety protection system play a significant role in the aspects of industrial energy storage and data center management.

Intelligent water meter

In cooperation with an intelligent technology company in Hangzhou, Misensor has developed a long-distance smart meter reading system. The system has the advantages of cost-effective, real-time, data sharing, etc., solving the increasing difficulty of meter reading by a water-supply company. It helps improve efficiency and reduce costs of meter reading.

In the past, traditional water meters required in-person manual meter reading that was very inefficient and prone to errors. Nowadays, with the help of automatic control technology, information network technology and sensor technology, smart water meters can convert mechanical signals into electrical ones and send the measured and recorded data to remote computers, realizing remote management of water meter information.

Misensor provides a matching reed switch and magnet for the smart meter system. When the counting turntable rotates once, the magnet installed on the turntable would pass through the reed switch once and a count pulse would be output by the reed switch at the same time. A count pulse corresponds to a unit of water consumption. The reed switch can open and close circularly due to cyclic action of the magnet and output the corresponding count pulse signals, thus, the final water consumption can be calculated by the system according to the received number of the effective pulses.

资料下载

Download

Flow Sensors: Liquid level Sensors Flow Sensors Position Sensors Temperature Sensors Pressure Sensors

Download

Scan QR code